Archives

An F-style clamp works well for getting into tight spaces, but how do you turn the handle? The answer: Just drill a couple of holes through it and insert a screwdriver. A 90° offset to the holes [...]

While staring at the pile of assorted hardware I just accidentally spilled onto my sawdust-covered floor, my thoughts quickly turned from banging my head against the wall to patting myself on the [...]

Vacuum attachments are a challenge to store. They come in so many shapes! I made this device to keep them all together, within easy reach. It’s just a long chain with shorter lengths of chain [...]

Sometimes it’s fun to build a gadget just because it’s a neat idea. There are many ways to draw a centerline, for example, but this method is very clever. It doesn’t require any measuring or [...]

Even though my shop is well-lit, sometimes I need more light right on my work area. Instead of rigging up additional lights, I attach a small clip-on LED light to my cap’s brim. It’s great for [...]

With all the high-tech, expensive tools in my shop, I still find a dozen uses for a simple, inexpensive hunk of paraffin wax. I use it anywhere I need lubrication to slide material: the tops of [...]

Shellac is a mainstay in my shop, both as a sealer and as a finish. I mix my shellac from flakes and usually go with a 1 lb. cut, which is ideal for brushing ultra-smooth coats. I used to measure [...]

 Here’s a trick for I use for removing a stubborn router bit from the collet. I cut 1/2″ wide slots in a few credit card-size pieces of laminate. I then slide as many cards as I can [...]

Frustrated with my vise’s inability to hold odd-shaped pieces, I tried many solutions: v-notched face plates, cork, bubble wrap, leather, etc., but to no avail. One day I pulled an old mop out of [...]

Like most people, I keep lots of different screws, bolts, nails, washers, and other small parts in bins. Instead of paper labels, I hot glue a sample of the actual part on the outside of the bin. [...]

Having grown tired of bending and tearing sheet sandpaper again and again to get the size I need, I finally decided to employ the time-honored trick of cutting it with a hacksaw blade screwed to [...]

Can you assume that a board is straight, just because you’ve jointed its full length? Nope. It can still be as bowed as ever. You really should check it before moving on to the next piece. [...]