Archives

Cordless Curler As I leaned over to press down while drilling some holes in a board, my long hair slipped into the drill’s vent slots and got caught in the...

Shellac is a mainstay in my shop, both as a sealer and as a finish. I mix my shellac from flakes and usually go with a 1 lb. cut, which...

Logan discusses his most-used tool in the shop: his apron.

The perilous flight of the world’s most valuable tool. Half of the airplane’s hydraulic system had failed at take-off; the other half failed as the plane was 10 minutes from...

  Bodger and blacksmith Don Weber shows how to effectively combine power and hand-tool techniques to build a simple and sturdy toolbox. Editor’s note: This article originally appeared [...]

They explain so much. It’s often possible to sum up a lot of situations with a rule, a principle that applies in almost all cases. When I teach seminars on...

This strong and simple – but uncommon – joint imparts a decorative touch. Editor’s note: This article originally appeared in the June 2014 issue of Popular Woodworking. After 20 years...

 Here’s a trick for I use for removing a stubborn router bit from the collet. I cut 1/2″ wide slots in a few credit card-size pieces of laminate. I then...

I buy glue in gallon jugs and, having tried about every glue bottle on the market, I thought I would never find the perfect one. My search ended while washing dishes...

One of the first things that many people notice when advancing the blade of a Preston/Record style shoulder plane (today’s Clifton and Lie Nielsen planes are based on that design)...

On today’s episode of the ShopNotes Podcast, Phil, Logan, and John talk pets in the shop (Because the Baha Men ain’t got nothin’ on us!), cordless tools, and a recap...

Last week the PW staff had the opportunity to spend an evening at Festool USA’s HQ in Lebanon, Indiana. In addition to learning some fun facts (the design is nearly...