In Tricks of the Trade

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Setting the depth-of-cut on my circular saw was awkward at best before I made this handy gauge. It’s just a thick block of wood with 1/4″ wide slots cut at precise, incremental depths. I made the slots on the table saw.

To set the depth-of-cut, I place the circular saw on the appropriate slot on the gauge, loosen the saw’s depth stop, drop the blade until it bottoms out, and then re-lock the depth stop. The gauge also works upside down for setting the height of a table saw blade.


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
Showing 2 comments
  • kenpem

    Love this! Great idea. I’ll add that to my collection of tips.

    Is it OK to link back here from my blog?

Start typing and press Enter to search