Archives

A micro-Adjust fence is the perfect accessory for making grooves, mortises, or other milling operations using a hand-held router. It allows you to precisely adjust the distance between the bit...

This fence is designed to be used at a drill press or router table, and features built-in dust collection for keeping your shop, and lungs, clean. Project #2505 • Skill...

Over the years, I have often clamped stops on my drill-press fence to register hole locations in workpieces. Unfortunately, I always seemed to lose the stops. Flip stops always seemed...

The key to good rip cuts is a good rip fence. The Biesemeyer table saw fence is so much a part of the modern shop that the name is almost...

Like any table saw rip fence, mine needs occasional realignment to the blade. Because my miter gauge slots are aligned parallel to the blade, I just set my fence parallel...

I love my dovetail jig except for one thing: If I forget to hold the router flat, it can tip backward off the front of the jig and ruin the...

Logan is really digging the new Harvey Big Eye Rip Fence System. In this video, he walks you through the standout features he appreciates.  

I needed a sacrificial fence for cutting rabbets with my tablesaw. All of the designs I’d seen required drilling holes in my saw’s fence or positioning clamps strategically out of...

Tool: Big Eye Rip Fence Shop Now Manufacturer: Harvey Woodworking MSRP: $1249+ There are times when there is a product released that I think really met the mark. One of...

Re-sawing a board is tricky. Most blades drift, so that you must angle the board to get a straight cut. Standard bandsaw fences can’t be angled to compensate for drift,...