I used to have three shooting boards for planing end grain: one for 90° cuts, one for 45° horizontal miters and one for 45° vertical miters. Now I’ve combined them...
Here’s a trick for I use for removing a stubborn router bit from the collet. I cut 1/2″ wide slots in a few credit card-size pieces of laminate. I then...
Can you assume that a board is straight, just because you’ve jointed its full length? Nope. It can still be as bowed as ever. You really should check it before...
My crosscut sled is my “go-to” jig for precise, square cuts. Recently, I added this self-adhesive tape scale – called Peel-n-Stick Ruler Tape – that makes it even more efficient....
A sharp pencil is a must for accurate work, but having a pencil sharpener permanently mounted in one place isn’t always ideal. The further away I am from my pencil...
Planing stock to fit standard dados is much easier than trying to find the right chipper and shim combination to fit the dado to your stock. I cut five grooves...
Drawer Helper Desperation is the mother of invention—isn’t that how the old saying should go for woodworkers? I invented this device when I realized that the drawers in my new...
When I crosscut hardwood plywood, I use an old technique to minimize tearout on the bottom face. I simply make two passes with my general-purpose blade. After setting the rip...
I use biscuit joints in lots of small projects, particularly for joining rails to legs. I usually reference from the bottom of the plate joiner rather than use its fence....
I built a deep drawer for my workbench so I would have lots of storage, but it created another problem. The tools I wanted were always at the bottom...
