<img class="lazy" height="1" width="1" style="display:none" src="data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%201%201'%3E%3C/svg%3E" data-src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">
 In Projects, Techniques

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.


Shown above is “Sunset,” an intricate segmented bowl by Hal Metlitzky.

When I learned woodturning in the mid-1990s, my goal was simply to make bowls and platters with fair curves, pleasing shapes and thin, uniform walls. If the wood figure popped, all the better. This was woodturning as a craft. And I figured that was a fine goal.

"Escape" by Margaret Garrard.

“Escape” by Margaret Garrard.

Then, I saw the work of Mick O’Donnell, who was experimenting with multi-colored dyes that disguised the wood, and David Ellsworth and John Jordan, who were carving and torching their turnings to create shapes and textures that were far removed from what came off the lathe. I realized there was a whole other level of woodturning out there. That inspired me to try to expand my skills even further.

Two turned and carved vessels by J. Paul Fennell

Two turned and carved vessels by J. Paul Fennell

Over the weekend I attended the American Association of Woodturners 2013 Symposium in Tampa, Fla., and found even more inspiration. As the photos here show, for many of these turners, woodturning is just a starting point on the way to making works that are really forms of art.



By registering, I acknowledge and agree to Active Interest Media's (AIM) Terms of Service and to AIM's use of my contact information to communicate with me about AIM, its brands or its third-party partners' products, services, events and research opportunities. AIM's use of the information I provide will be consistent with the AIM Privacy Policy.

Start typing and press Enter to search

Shop layout, 1 of 2