Author Archives: Brad Holden

Friday’s Tip for March 21st

Alright, this one's actually from our old Question & Answer department. Clean Up Squeeze Out Q. I saw one of those woodworking wizards on television the other day. As I watched the guy build a three-day project in 30 minutes, I noticed he washed off glue squeeze out with a wet...

Friday’s Tip for March 14th

Retractable Chuck Key After losing three chuck keys I attached the fourth to a plain, old retractable key chain. Now I don't have to turn my shop inside out looking for my chuck key because it'salways within easy reach. I truned the holder upside down because the chain pulls out mor...

Friday’s Tip for March 7th

Versatile Center Gauge I wanted to add accent dowel "dots" down the center of some slightly curved, tapered table legs. Sounds simple, but I nearly pulled my hair out trying to accurately find the center of these legs using a ruler! I was about to tick off the center of the...

Friday’s Tip for February 28th

No-Hassle Filter Cleaning My air filter works great and sure makes my shop a cleaner and healthier place to work. But cleaning the pleated filter was always a problem. Blowing or shaking it out just made a big mess. I tried vacuuming it but my vacuum wand would attach itself to...

Friday’s Tip for February 21st

Knot-Free Planing I use a lot of #2 pine boards, but when I plane them, the knots often nick my knives. I found a way to prevent this by cutting out the knots before I plane. Because most of my projects require only short pieces, this works fine and my knives...

Friday’s Tip for February 14th

Stable Roller Stand I bought a roller stand to support my lumber when sawing. It worked okay, but sometimes the rear leg would fold up and the stand would collapse. This was very annoying. I fixed it by adding some plastic cable ties at the top and bottom of the leg...

Friday’s Tip for February 7th

Flip-Top Sawhorses I got tired of rummaging around for a blanket or anything soft to lay my finished projects on, so I rigged up these simple carpet caps that fit on top of my sawhorses. They just flip out of the way when I'm back to rough work.  James Blandford My...