Archives

  Harvey Tools recently released a new line of shop tools aimed at the hobbyist under the Ambassador name. We got a chance to put both the 14“ bandsaw and the C200-30 table saw to work [...]

Re-sawing a board is tricky. Most blades drift, so that you must angle the board to get a straight cut. Standard bandsaw fences can’t be angled to compensate for drift, so many folks use a [...]

If it were up to me, I’d be able to divide myself into two parts. Editor’s note: this article appeared in the April 2020 issue of Popular Woodworking One would focus on my family, health, [...]

Board-Stretching Joint I bought a planer/molder so I could make my own moldings. My living room required one 28‘.-long molding, but all I had to make it were 12‘. boards. I didn’t [...]

I lost the rubber pads that came with my clamps. I liked the way the pads protected the wood, so I decided to make my own. After a couple dips in liquid plastic ($9 at a hardware store), my [...]

One jig opens up a whole world of useful shapes If you’ve ever wanted to venture beyond the world of squares and circles, consider incorporating elliptical shapes into your next design. Cutting [...]

A look at Ken Richards’ life in woodworking. After six years as a draftsman at Boeing—his first job out of high school—Ken Richards had enough money put aside to buy five acres and a barn in [...]

Tool: Trim Square Manufacturer: Milwaukee MSRP: $11 This gem of square has become a go-to for use around the shop. Taking its design cues from the common rafter square, the compact size is a much [...]

Tool: Dust Deputy Bagger Manufacturer: Oneida MSRP: $129.95 Oneida’s Dust Deputy separators are an excellent upgrade for shop vacuums, especially in the shop. The cyclonic action separates out [...]

Tips and techniques for beautiful bowties Furniture made from thick wood slabs, with gorgeous grain and natural edges, at once rustic and refined, has remained popular ever since George Nakashima [...]

Gerrit Rietveld’s simple design for a lounge chair is a great platform for exploring ergonomics. PROJECT #2005 • Skill Level:Beginner • Time: 4 hours • Cost: $50 Gerrit Rietveld was a Dutch [...]

Recreate this classic design and push your skills to the next level. Project #2004 • Skill Level: Advanced • Time: 3 days • Cost: $400 Of all the surviving Charles Limbert designs, there are [...]