A sharp reminder and remembrance of a life cut short. Editor’s note: This article originally appeared in the October 2014 issue of Popular Woodworking. A chisel roll is an...
Designer and builder of elegant but simple iconic furniture. Editor’s note: This piece was originally published in the December 2009 issue of Popular Woodworking in memoriam of Sam’s [...]
Many woodworkers have mixed feelings about modern design in woodworking. Traditional style plans outsell our modern furniture plans by at least 3:1, and the appearance of modern furniture in our...
DeWALT is recalling nearly 1.4 million miter saws for a potential safety issue. According to the CSPC “The miter saw’s rear safety guard can break or detach, posing an injury...
When I crosscut hardwood plywood, I use an old technique to minimize tearout on the bottom face. I simply make two passes with my general-purpose blade. After setting the rip...
A piece of thick plate glass is dead flat and it’s easy to use to align standard jointer knives that have gib screws. A couple of rare-earth magnets secured to...
When a family friend recently visited my new cabinet shop, he commented, “Your dad and grandpa would’ve loved this place. It wasn’t always like this!” He meant that although both...
Like many woodworkers, I own a basic half-blind dovetail jig, which I use only occasionally for making utility drawers. During the interim, I tend to forget the setup procedures and...
Hole saws provide an inexpensive way to bore large holes, but they have a maddening tendency to clutch the drilled disk afterward. I’ve found that the best approach for removing...
Whenever creating small pieces that include a routed detail of some sort, it’s best to do the routing on the larger “parent” board, and then separate the small piece from...
I have long used my car’s scissor jack for house and shop projects including lifting a settled deck and leveling workbenches. And when I needed to install a new set...
Shaker furniture is known for it’s clean, simple lines and quality construction. There’s been no shortage of Shaker woodworking projects in the pages of Popular Woodworking over the [...]
