Archives

I find cutting dowels on the band saw to be a hassle. For one thing, the blade can grab the round stock and twist it out of your hand if you’re not using a support cradle guided by the miter …

Scientific Name: Prunus serotina Other common names: Black cherry, cabinet cherry Growing regions: The Eastern half of the United States, plus Arizona and New Mexico; and Mexico and Canada Tree [...]

Occasionally, I like to veneer my own cabinet doors. Like many small-shop woodworkers, I do the job by covering the veneered face with a platen, then applying clamping pressure onto the work via [...]

Making long, perfectly straight cuts with handheld power saws, such as jigsaws and circular saws, can be a real challenge. They aren’t difficult when a straightedge is used as a guide, but [...]

This simple jig enables you to cut accurate tenons and slice very thin pieces. I use a flush-cut saw because it has no set to its teeth and, therefore, won’t damage the jig. Plus it leaves a [...]

  A sharp reminder and remembrance of a life cut short. Editor’s note: This article originally appeared in the October 2014 issue of Popular Woodworking. A chisel roll is an unlikely [...]

Designer and builder of elegant but simple iconic furniture. Editor’s note: This piece was originally published in the December 2009 issue of Popular Woodworking in memoriam of Sam’s [...]

Many woodworkers have mixed feelings about modern design in woodworking. Traditional style plans outsell our modern furniture plans by at least 3:1, and the appearance of modern furniture in our [...]

DeWALT is recalling nearly 1.4 million miter saws for a potential safety issue. According to the CSPC “The miter saw’s rear safety guard can break or detach, posing an injury hazard due to [...]

When I crosscut hardwood plywood, I use an old technique to minimize tearout on the bottom face. I simply make two passes with my general-purpose blade. After setting the rip fence, I cut a [...]

A piece of thick plate glass is dead flat and it’s easy to use to align standard jointer knives that have gib screws. A couple of rare-earth magnets secured to the glass with double-sided tape [...]

When a family friend recently visited my new cabinet shop, he commented, “Your dad and grandpa would’ve loved this place. It wasn’t always like this!” He meant that although both men were pro [...]