<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">

Fine Sanding Myths

Why are you working harder than you need to? Sanding is boring. It’s boring to watch, it’s boring to do, and I find it boring to write about. But myths are fun to write about, and there are some [...]

Line and Berry Inlay

Make this traditional design with a router and plug cutters. Line and berry inlay is an old American tradition. There are many variations of the design, but all consist of a series of circular [...]

Disposable Drill Press Table

Instead of making disposable inserts for my drill press table, I found that it’s faster and cheaper to make disposable fence/table assemblies. I can use the entire surface of my disposable [...]

Protecting Tools from Kids

Sometimes a little talking-to (and video surveillance) is all it takes. I have noticed three things about tools and kids. Kids can find tools even if it requires tunneling under the garage wall. [...]

Detail Rabbet Plane

Tool: Detail Rabbet Plane Shop Now   Manufacturer: Veritas MSRP: $72.50 Years ago, I bought my first rabbet plane, a Clifton 410, to get me out of a jam. My bread and butter work was [...]

Use Glass to Set Jointer Knives

A piece of thick plate glass is dead flat and it’s easy to use to align standard jointer knives that have gib screws. A couple of rare-earth magnets secured to the glass with double-sided tape [...]

Fighting Rust with Brass and Bronze

The summer is here in earnest, and with it came the rising humidity. Humidity and ferrous-based metals such as carbon steel and cast iron don’t get along that well, and the result of the [...]

Medicine Cabinet

A slick technique makes the divided-light door a snap. In 2008, I built a contemporary maple chimney cupboard to hold towels in my bathroom. Eight years on, I decided it was time for a matching [...]

It Wasn’t Always Like This

When a family friend recently visited my new cabinet shop, he commented, “Your dad and grandpa would’ve loved this place. It wasn’t always like this!” He meant that although both men were pro [...]

Offset Biscuit Joints

I use biscuit joints in lots of small projects, particularly for joining rails to legs. I usually reference from the bottom of the plate joiner rather than use its fence. When I want to make an [...]

page 1 of 3

Start typing and press Enter to search