Magnetic Stop-block for the Table Saw
When crosscutting a series of short pieces from a longer board using the table saw’s miter gauge, it’s dangerous to use the rip fence as a stop. The freed pieces can get jammed between the blade [...]
Mistake Magnifier
How do you know when your miter gauge is set exactly at 90°? Here’s a method I learned years ago, before I could afford a precision square to check the cut. You’ll need a 24″ [...]
Testing for Square
On a crosscut sled, the fence must be absolutely square to the blade. Here’s a super-accurate method of testing for square. It makes errors easier to detect by magnifying them by a factor of [...]
Digitize Your Miter Gauge
Here’s a hi-tech way to set your tablesaw’s miter gauge to within 1/10 of 1° of any angle. It really works well for cutting picture-frame miters. The key is to use a digital angle gauge. I bought [...]
Miter Gauge Shooting Board
While I have a shooting board with a 90° fence, any other angle requires fussing with wood, screws and a protractor. In a moment of desperation, I cut a groove down the center of an old bench [...]
