<img class="lazy" height="1" width="1" style="display:none" src="data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%201%201'%3E%3C/svg%3E" data-src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">
 In Projects

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

By Nick Engler
Pages: 49-56

From the February 2004 issue #139
Buy this issue now

Although routers were originally designed to create moulded shapes, they can be excellent joinery tools. In fact, they’re better in some ways than table saws, professional-quality mortisers or dado cutters when it comes to cutting joints. There are several reasons routers have an advantage:

• Simplicity: Setting up hand-held or table-mounted routers is rather straightforward. Tools dedicated to joint-making such as hollow-chisel mortisers are more complex and require more time to set up. Sure, it could be worth the effort to use a mortiser if you’re planning to make dozens of duplicate joints. But if all you want to cut are a few mortises and tenons, for example, a router will save you loads of time.

• Versatility: You can make a greater variety of joints with a router than with any other joinery tool. No matter if you have a fixed-base or plunge router, you can cut more types of joints than with any other kind of tool.


 

By registering, I acknowledge and agree to Active Interest Media's (AIM) Terms of Service and to AIM's use of my contact information to communicate with me about AIM, its brands or its third-party partners' products, services, events and research opportunities. AIM's use of the information I provide will be consistent with the AIM Privacy Policy.


Start typing and press Enter to search