We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
Blade Caddy
| Here’s a handy tote for scrollsaw blades that I fashioned from a scrap of 2×6, a piece of plywood, and two Peg-Board multiple-tool holders. I cut the curved tips off the multiple-tool holders with a hacksaw so they would sit flat against the plywood. I attached the holders to the caddy with cable staples. These small plastic tubes are perfect for holding scrollsaw blades. I wrapped some masking tape around each tube and wrote the blade size on it. | You may also like… |
