Rolling Scrap Bin

Who says you can’t put a square peg in a round hole?  My scrap bin is made from round cardboard tubes made for concrete forms. These tubes are available at home centers; they’re [...]

Woodworking With Kids: Make A Pumpkin

My son Oliver has been fascinated by my woodworking projects for years now, but has always been resistant to the idea of building anything of his own. I decided to take advantage of his love of [...]

EKASAND Dust Extractor and Sander Review

Deluxe Sanding and Dust Collection Tool: Dust Extractor Shop Now Sander Shop Now  Manufacturer: Uneeda MSRP: $1289 (dust extractor) $499 (sander) You may not be familiar with Uneeda, but the [...]

Using T-Track

T-track is a versatile product that has many great uses around the shop. It can be attached to the fence of a chop saw, drill press or router table to provide a quick, secure place to attach [...]

EZ Planing Sled: A Preview

Truing and milling twisted or cupped boards whose width is broader than your jointer is always a challenge. And this becomes a true headache if you need to do this fast and efficiently.  If you [...]

No-Mistake Protractor

Tool: 5-in-1 Combination Protractor Shop Now  Manufacturer: Starrett MSRP: $142 If walls were all exactly 90 degrees, installing cabinets and trim would be a lot easier. When it comes to [...]

What’s The Best Sharpening System?

In our latest video, we’re comparing water stones, oil stones, and diamond stones. Get a basic overview, then learn the pros and cons of each sharpening method. Click here for more articles [...]

Bottle Cap Jig Knobs

Bottle Cap Jig Knobs I’m always trying to use up scraps and stuff that would otherwise end up in the trash. My latest devices are jig knobs made with plastic bottle caps, which have a grippy [...]

LVL Workbench

Tradition meets technology when we marry an 18th-century workbench design with modern laminated veneer lumber. Editor’s note: This article originally appeared in the November 2009 issue of [...]

7 Ways to Store Clamps

“You can’t have too many clamps,” a wise cabinetmaker once said. That is certainly true, but in a small shop, you can easily run out of room to store them. On clamp is so different from [...]

Post & Rung Standing Desk

Two classic joints build a beautiful utility piece PROJECT #2103 • Skill Level: Advanced • Time: 1 week • Cost: $200 As we’ve settled into our fully working from home routine, one thing has [...]

Drawknives & Spokeshaves

These once-standard tools still have a place in the modern shop. Here's what you need to know about the use, care and keeping of drawknives and spokeshaves.

page 1 of 2
0

Start typing and press Enter to search