In Shop Blog

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

In every craft, there is a magic device that acolytes must learn to manipulate and master.

In joinery, I think dividers (aka the compass) are our totemistic thingy. In journalism, you have to learn the FOIA (Freedom of Information Act). And in traditional carpentry, you need to master the steel square.

I suck at using the steel square. I have a chart in my shop that helps me use it to set angles in 1° increments between 0° and 45°. I swing it around my shop like a big try square. And I use it to find 90° in space at times.

But those three functions are about less than one-half of one percent of the things the steel square can do for the carpenter and joiner.

This week, I’m trying to pick up a few more tricks from this simple tool as I develop a class for the Woodworking in America Conference in Pasadena, Calif., this weekend. My demonstration will show how to build a sawbench with compound-angle legs in less than an hour.

Because of the wacky geometry in this project, I knew that I needed to probe the steel square a little deeper. It can solve and help scribe compound angles with ease. And I also knew that I needed to mash up the traditional carpentry designs for sawhorses and the woodworking designs for sawbenches to develop a new animal.

I think I’ve succeeded. But you’ll have to come to Pasadena to find out.

Bring tomatoes in case I fail.

— Christopher Schwarz

 

Check out more of Chris’s work in his set of books on workbench building.


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recent Posts
Showing 3 comments

Start typing and press Enter to search