We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
by John Vasi
Sometimes I prefer to sand by hand using a rubber block. This method gives me a better feel for the work than using a random-orbit sander does. Blocks like mine have been around for many years, but I believe I’ve made an improvement.
I had noticed that most of the work was done by the paper’s leading edges. The paper’s center didn’t seem to have any wear at all. To compensate, I stick a piece of duct tape to the bottom of the sanding block, not quite reaching the ends, before I attach the sandpaper. The tape allows me to apply even pressure across the block’s entire surface, but it isn’t thick enough to spoil the block’s flatness.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
