Archives

Once the smokestacks were glued in, it was time for the paint job. My plan was to leave the deck floors in their natural wood look and only paint the ship’s elevations. Check out part 1 and part [...]

After finishing all the work on the bandsaw, I clamped the hull in a vise and, with the help of a rasp and a file, fine-tuned the bow and stern. Be sure and check out Part One of this project.…

Only a handful of tools are needed to recreate this iconic vessel. A few years ago, I crafted three identical waterline wooden toy ships based on the iconic design of the RMS Titanic and its [...]

If you follow woodworking news, you might have noticed a new player in the plane market: the Melbourne Tool Company from Australia. They’ve been promoting their line of planes, spokeshaves, [...]

In my school’s woodworking program, we have a variety of chisels, ranging from wood-handled to plastic-handled. We even have a chisel without a handle, which is a full-tang hybrid between a [...]

One staple you’ll likely find in most woodworking shops is a fasteners/hardware bin filled with small plastic drawers. These drawers hold everything from nails and screws to hinges and glue [...]

The aftermarket bench plane blades market is brimming with quality options, from Hock to Veritas to WoodRiver, and now, Taylor Toolworks Premium Blades. A common feature of these premium blades [...]

 Knowing how to hang a new handle on a hammer or an axe opens up numerous opportunities to restore your old tools and allows you to bring back to active duty eBay and flea market-bought heads of [...]

Building a sash clamp is quite easy. Begin by milling a hardwood bar to the appropriate thickness. The bar’s thickness should allow it to travel smoothly between the sash clamp’s shoulders. Next, [...]

Beyond its prime use as a bar clamp, an inverted T-bar sash clamp can be handy when holding pieces for planing and gouging.  Below is an example of how to use this clamp to tie down a branch and [...]

This blog entry will make our UK base readership happy and will bring a smile to the British expats who live in the USA. This week’s story is about sash clamps, a type of clamp that I [...]

In the first part of the story, I showcased my small bandsaw and discussed the basic procedure of aligning the blade over the tires and checking for drift during a rip cut. Now, in this segment, [...]