OK, I admit it: Keeping both a pencil and tape measure close at hand is a problem for me. I generally have only one or the other, sometimes neither. SpeedClip,...
I'm at the home center, trying to remember whether my sander takes five- or eight-hole discs. I've got a fifty-fifty chance, but if I guess wrong, the dust collection on...
It's hard to beat the convenience of a quick-acting clamp that you can grab, squeeze and tighten—all with one hand. The new Multi-Grip Clamps from Wilton have entered the...
Delta has put a new twist on miter saws by mounting the motor vertically, instead of horizontally, on its new 36-412 12-in. dual-bevel compound miter saw. The result is increased...
I don’t have enough room for a permanent outfeed table for my saw. Instead, I mobilized my file cabinet (it’s great for storing saw blades, sandpaper, etc.) and added...
I use air tools for sanding, nailing and finishing. I usually work in my garage, but when the weather is nice, I often grab my sawhorses and move outdoors. I...
Clamping featherboards to my tablesaw was always a hassle until I discovered locking welding clamps. Their C-shaped jaws adjust to fit the webbed castings on the bottom of the extension...
I used to have trouble hanging onto my pencil, but now it's always at arm's length. I simply place magnets on each side of my shirtsleeve and twist a nut...
When it's hot, or when I'm gluing a complex assembly, yellow glue is hard to use, because it sets up too fast. To slow the drying, I just dampen the...
Installing a dado set on my left-tilt saw makes the scale on the rip fence un-usable. Here's why: The cutters stack from left to right, toward the fence, so each...
By Randy Johnson You don't have to spend much money to get a good computer-aided drafting (CAD) program for drawing woodworking projects. Fifty bucks will buy you a starter program...
You can’t use your safety glasses and earplugs if you can’t find them. The new Safetypaq, $40, includes earplugs, work gloves and two pairs of safety glasses in a convenient...
