Archives

Delta re-invents its flagship table saw with great success. Bravo. By Glen D. Huey Page: 28 From the August 2009 issue #177 Buy this issue now There’s been so much written about Delta’s new [...]

By Christopher Schwarz Page: 29 From the June 2009 issue #176 Buy this issue now My first great set of chisels was made by Ashley Iles, a small manufacturer with deep roots in the toolmaking [...]

By Glen D. Huey Page: 29 From the June 2009 issue #176 Buy this issue now Routers perform a lot of work in the shop, but handheld routers are only part of the story. You can perform even more [...]

This do-it-all band saw has all the power and finesse you’ll need. By Glen D. Huey Page: 28 From the June 2009 issue #176 Buy this issue now Grizzly calls its model G0636X the 17″ Ultimate [...]

By Glen D. Huey Page: 31 From the April 2009 issue #175 Buy this issue now Ridgid now has its version of a granite-top table saw on the market. With the motor mounted inside the cabinet and the [...]

By Glen D. Huey Page: 31 From the April 2009 issue #175 Buy this issue now Many woodworkers rely on random-orbit sanders as their primary method to level an out-of-whack glue-up or for smoothing [...]

New saw design opens the door to hand sawing. By Robert W. Lang Page: 30 From the April 2009 issue #175 Buy this issue now One of the thrills of woodworking is learning a new technique and adding [...]

By Glen D. Huey Page: 40 From the February 2009 issue #174 Buy this issue now Drills have been the focus of many tool manufacturers for a few years now. We’ve had to endure comparisons of [...]

By Christopher Schwarz Page: 38 From the February 2009 issue #174 Buy this issue now For those who think Veritas makes planes that work better than they look, I want you to feast your eyes on the [...]

Safety aside, this is a solid saw on its own. By Glen D. Huey Page: 36 From the February 2009 issue #174 Buy this issue now Woodworkers have been waiting for more than two years for the SawStop [...]

By Christopher Schwarz Page: 29 From the February 2010 issue #181 Buy this issue now Tail-vise hardware for a workbench can be expensive, fussy or tricky to install. Now Veritas has invented a [...]

By Glen D. Huey Page: 29 From the February 2010 issue #181 Buy this issue now If an 18-volt Lithium-ion drill-driver is in your sights, you just may want to take a look at the new DCD760 from [...]