Friday’s Tip for December 13th

Glue-Up Helper I've always struggled with the rubber bands I use to hold jewelry box sides square and steady during glue-up. The biggest pain in the neck was cleaning the...

Friday’s Tip for December 6th

Tabletop Connection Steel tabletop fasteners are a great way to attach a tabletop to its base while still allowing for seasonal changes. On a table with straight aprons, it’s easy...

AW Extra 12/5/13 – Making Curved Doors

Making Curved Doors Kerfkore flexible panels handle curves with ease. By Brad Holden Curved doors and panels add elegance to any project, especially kitchen cabinets. Making these complicated [...]

Friday’s Tip for November 22nd

Getting the Point I frequently use awls in my work and like to keep them needle-sharp. This little jig takes only a few minutes to make and guarantees a fine,...

Friday’s Tip for November 15th

Cross-Grain Trim I recently needed to attach molding across the sides of some bookcases. Because the sides were solid wood, I had to allow for some seasonal movement. I used...

AW Extra 11/14/13 – Working with Melamine

Working with Melamine It’s dirt cheap, it’s practical, and best of all, there’s no sanding and finishing! By Dave Munkittrick Melamine is the professional cabinetmaker’s best friend. Build a cabinet...

Friday’s Tip for November 8th

Repairing Ripped Belts Sanding belts can rip at the worst possible moment – such as when you're out on a jobsite with no spares. When this happens I remove the...