CNCs vs Pattern Shaping

If you build furniture out of wood, you’ll find that once your design becomes more than a collection of straight lines and begins to include curves, shapes and other details – you enter the [...]

Featherboard Ripping Stop

Featherboard Ripping Stop I’m always on the lookout for different ways to use the things I already own. I found that I didn’t need to buy or make an extra jig for ripping thin, uniform strips on [...]

How To Make Your Own Bar Rail Molding

Plus 9 useful tips for making any large-profile molding. If adding a bar is on your list of home improvements, you know that its large, contoured front rail is an essential element. Commercially [...]

Steam Powered

Successful wood bending with heat and water is more art than science. Long ago, some caveman made a curious discovery: Wood becomes pliable when it is both hot and wet, allowing it to be bent to [...]

Make ‘Dog Bone’ Chest Lifts

This week I am finishing up the carcase for a special tool chest for an upcoming pair of articles in Popular Woodworking Magazine and I turned my attention to the lifts – the handles you use to [...]

AW Extra 7/10/14 – Making Curved Doors

Making Curved Doors Kerfkore flexible panels handle curves with ease. By Brad Holden Curved doors and panels add elegance to any project, especially kitchen cabinets. Making these complicated [...]

Reading Grain Direction

Reading Grain Direction “Going against the grain” is a familiar phrase. It means doing something the wrong way.When you’re talking about wood, you always want to go with the [...]

AW Extra 7/3/14 – Perfect Edge Joints

Perfect Edge Joints A 6-step tune-up sets your jointer straight. By Dave Munkittrick   Jointers are simple machines with few moving parts, but the two beds, the fence and the cutterhead all [...]

Wedged Mortise and Tenon

Wedged Mortise and Tenon This joint will never loosen! By Tom Caspar   Tap, tap, tap. The wedges go home, the glue squeezes out and a big smile lights up your face. “This joint [...]