Archives

Crouching to operate my compressor's drain valve was no big deal until my football-ravaged knees started acting up. To keep from grimacing in the sawdust, I devised a more civilized...

I use my grinder almost exclusively for beveling my chisels, so I like to keep the tool rest set to produce the 25-degree bevel I prefer. Having to reset the...

Before I installed this device, I couldn't lock my bandsaw's table securely enough for resawing. If I banged a heavy board on the outboard side, the table would always tip...

  Vertical Lumber Organizer Before I installed this vertical storage rack, my lumber was hard to manage and a housekeeping nightmare. I could never find the piece I wanted, and...

While sweeping up offcuts from around my bandsaw, I realized two things: First, I hate sweeping. Second, a dustpan-shaped tray attached to the bandsaw would catch most of the offcuts...

  My shop has limited storage space, so my tablesaw accessories used to cram its tuck-under drawer and cover the extension table. My new accessory storage wall makes everything accessible...

Hauling my benchtop planer or miter saw out every time I needed to use one or the other was hard on my back until I devised this mobile base. It...

I don't have room in my garage shop for a permanent clamp table, so I made this folding version from a leftover 2-ft.-wide sheet of 3/4-in.-thick plywood. Folded, it's less...

I like to keep my fix-based routers handy and ready to go with my favorite bits. Of course the bits prevent me from storing the routers standing up. That's why...

My favorite woodworking projects are clocks—big ones or little ones. If it ticks, I’ll make it. My latest venture provided me with the challenge of flattening the face of some...

  To strengthen miter joints in narrow stock, use face frame biscuits. They're like standard biscuits but smaller (about 1-3/16 in. long), so you can use them in stock as...

Snag-Free Hose By Peter Natoli I love using dust collection with my orbital sander, but the hose always caught on the edge of my workbench. I fixed this problem by...