Archives

AS I CANNOT ENTER THE CONTEST THEY ARE ADVERTISING.DUE TO NOT BEING A USA CITIZEN. I THOUGHT I WOULD SHOW YOU WHAT I DID TO AN OLD TABLE WITH CABRIOLE LEGS.THIS...

STOOL MADE FROM OFF CUTS OF MDF .READY TO BE PAINTED.

THIS IS A PIECE OF BARK FROM AN OAK TREE.DOES NOT LOOK MUCH? SIZE IS 7 INCH X 10 INCH.THIS BARK IS PROBABLY 25 TO 30 YEARS OLD BEFORE THE...

   I’m using a trim router to distress the edges of the cupboards.        Since I was unable to use biscuits to attach the face frame to the lower...

Video – Glazing a picture frame Projects – The Stickley Arm Chair Projects – Cherry Sideboard Full-Size Plans

RADIATOR COVER MADE FROM 18 MM MDF AND HARDBOARD. HARDBOARD WAS PRE BOUGHT DUE TO PATTERN BEING STAMPED OUT ON A MACHINE BED.RADIATOR COVER WAS PRIMED UNDERCOATED AND RADIATOR GLOSS...

AS I HAVE DENAILED A FEW MORE PALLETS,HAVE MADE THIS BOOKCASE AS I HAVE ALOT OF BOOKS THAT NEED A HOME.THIS IS OILED WITH BOILED LINSEED,AS ITS EASY TO WIPE...

  Trim routers are great tools, but the base is so narrow that they have the tendancy to tip over when milling edges. While one hand holds the router itself...

TIP FOR HEATING GLUE ,USE OLD IRON,HANDY FOR HEATING GLUE ON.ALSO HEAT IS VARIABLE ON AN IRON.

HERE IS A TIP IF YOU WANT TO MAKE LOOKALIKE EBONY STAIN .FIND AN OLD 78 RECORD OLDER THE BETTER AS THEY ARE MORE BRITTLE?BREAK RECORD INTO HUNDREDS AND THOUSANDS,THEN GET...

      To proceed with the glue up of face frames to the cupboards I rather use sawhorses to have more room under the cupboards. I must say that...

    This is the last chance I have to sand the interior edges of the face frames. Once installed, it would be practically impossible to sand properly at the shelves...