Archives

3 Tapered Legs on the Jointer Advanced jointer techniques yield smooth, consistent tapers. By Seth Keller After I learned to cut tapered legs on the jointer, I never went back...

  Finally it’s time for the glue-up. The pieces rest on a heavy piece of raw cardboard to prevent any mess on my workbench. Everything is at arm’s reach for...

THE LIFT OFF COFFEE TABLE WITH FRAME IN ACTION!

FRAME THAT CAN BE CONVERTED INTO TIMBER TO MAKE LIFT OFF TABLE.

Glass for Woodworking By Brad Holden Once you delve into the world of glass, you may find there’s no turning back. Glass is a versatile material. When you want to...

by John Vasi         Sometimes I prefer to sand by hand using a rubber block. This method gives me a better feel for the work than using...

by Chip Harding       Sanding between coats of polyurethane is tough on sandpaper. And I make it tougher, because I never wait the recommended 72 hours before recoating....

by Tim Johnson         Waterstones have always been my preferred method to produce a razor-sharp edge. I store them in a plastic tub filled with water, so...

by Lou Bush         I’ve had my canister-filter dust-collection system for about two years.  It works great, but I figured out a new way to get it...

by Frank Muhvich Storage space is limited in my shop, so my pipe clamps hang from the ceiling. I made this rack from 3/4-in. plywood and attached it to the...

  I have two options to make the beadboard panels that will fill the inside of the lower cupboard doors : The router outfitted with an appropriate bit or the tablesaw...

TIMBER ARBOUR MADE FROM PART PALLETS PART CLS TIMBER.TREATED WITH BOILED LINSEED OIL. PALLET TIMBER WAS USED FOR SIDES AND ROOF,ALSO DIAMONDS ON FRONT AND BACK.PALLET STRIPS ARE  3 INCHES...