We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
To give a decorative touch, I’m installing on the router a flush trim bit which has a fine V tip.
I align the V tip with the joint between the uprights and the face frame. The bearing riding against the uprights will assure uniformity.
To prevent any tipping on the edge, I’m using my shopmade D-handle router base.
By using this router bit, the joint is perfectly uniform.
To see the details of all the steps from the begining, click here.
Best,
Serge
http://www.atelierdubricoleur.spaces.live.com
