In Projects

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Cut this stout joint using a simple jig, and your table saw or router.
By Bill Hylton
Pages: 28-31

From the June 2005 issue #148
Buy this issue now

Visit most any antiques store or flea market, and you’re sure to see stacks of old wooden boxes marked with the logos of bygone businesses. Small boxes for cigars, big ones for fruit and lots of in-between sizes. All are assembled at the corners with interlocking square pins or fingers – the box joint.

The box joint is a sort of square-cut through dovetail. It’s used in the same situations as the dovetail – assembling boxes, drawers and casework. It has pretty fair mechanical strength, but what it does is create a tremendous amount of gluing surface to create a stout joint.

From the June 2005 issue #148
Buy this issue now

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search