OAK POT | Popular Woodworking

Posted July 4, 2009

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

HAD OFF CUT OF OAK 3 INCH X 2 1/2 INCH MADE THIS SHAPE IN 2 CUTS ON LATHE USING A 4 INCH PIECE OF TOOL STEEL WHICH I GROUND TO THE PROFILE OF POT. THE LID WAS THEN PARTED WITH A TURNING TOOL,THEN TURNED INSIDE HOLLOW.FINISHED WITH FINE WIRE WOOL AND POLISHED WITH ORDINARY HOUSEHOLD FURNITURE POLISH.