In Shop Blog

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

In this blog entry I will show how the hope-chest case was glued together. 

1. The sides were glued to the bottom and await the next stage: dropping on the two end parts.

2. Here are pictures of the corner joint between the leg, the side, and bottom panel.

3. The end pieces are being dropped over.

4. Clamping the parts: Since I did not have a sufficient number of long clamps I had to improvise something. I used the longest clamps I had and connected them jaw to jaw.

Next time I will show how I started building the lid….

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search