In Shop Blog

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Laying out accurate angles on your work is critical. So it’s funny to me that we spend $100 on a Starrett square for 90°, then spend $1.59 on a plastic school protractor for every angle that isn’t 90°.

Lucky for us, we don’t have to spend $100 to get a protractor that is accurate enough for woodwork. (Yes, I have used a machinist dial protractor and find they make you chase errors that aren’t there.)

The answer is a chalkboard protractor – the large protractors that geometry teachers would use to lay out constructions on the chalkboard. These are still made today for teachers who use chalkboards or large dry-erase boards. These large protractors are also common on the secondary market.

My mom bought me an old Acme protractor years ago that is my favorite. It’s 15-3/4” wide and has a wooden handle that helps me hold it in place on the work. The best part about the tool is that the individual degree marks are 1/8” away from each other. This allows me to dial in to a fraction of a degree with ease.

On a typical plastic protractor that is 6” wide, the degree marks are about 1/32” apart. That’s a huge difference – especially for my 50-year-old eyes.

So what if you can’t find a vintage one like mine?

Amazon carries a large plastic one by ETA that is less than $15. Here’s the link.

There are wooden ones still made, but I haven’t been able to find any that feature 1° increments. Most seem to have 5° increments. If anyone finds a reliable source for wooden ones with 1° increments, please post a comment.

One last note: I know there are lots of ways to set angles accurately. Heck, I used to do it with a framing square. And I’ve tried a lot of gizmos through the years. For some reason my brain is most compatible with the 180° half-circle protractor. If you have a favorite method, that’s cool. Don’t poop on me, and I won’t return the poo.

— Christopher Schwarz

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recent Posts
  • fcschoenthal

    I found some great full scale printable templates at to make your own protractors showing 1/2° increments.

Start typing and press Enter to search