Techniques

A Low-angle bench planes allow you to change the blade’s effective cutting angle to suit specific tasks. Because the bevel points up on a low-angle plane, the effective cutting angle can be [...]

When I’m not using my miter saw station, I simply remove the saw and stand the 2x12 on end, secured against a wall. The whole setup cost me about $50.

Turn on the sander and exert just enough pressure to keep the pad in place.The rust should be gone in a matter of seconds.

Editor’s note: The measured drawings for the Risom coffee table in this article by Michael Crow are similar to the shop drawings included in Crow’s new book, “Mid-Century Modern [...]

Use a bandsaw, not a tablesaw. It’s not good shop practice to rip a board less than 12 in. long on the tablesaw because it may kick back at you.

I am often asked: “Why should I purchase a jointer or planer?” My answer is always the same: “Get yourself a jointer first, then think about a planer.” The reason...

Have you seen all the new CNC machines available to hobbyists these days? Everybody who sells woodworking tools seems to carry at least one model. Maybe you’ve been thinking about...

Alan Lacer has been involved in the field of woodturning for almost four decades. He’s done almost anything and everything you can think involving the craft from turning to teaching to...

At around $1 an eraser shield is one of the best buys in your drafting toolkit. This little bit of punched stainless steel if often in my hand when I...

If you are like me – compound miter joints always make me a little nervous – your blood pressure rises a little when you have to draw or cut a...

Congratulations to “church_clown” (a.k.a. Don Fugitt). He’s the winner of a print copy of “Build It with Dad: Woodworking Fun for the Whole Family.” The book features 22 kid-friendly [...]

Polyurethanes for floors or woodwork are often formulated so they don’t have to be sanded, but polyurethanes for furniture generally should be sanded.