Archives

  I have two options to make the beadboard panels that will fill the inside of the lower cupboard doors : The router outfitted with an appropriate bit or the tablesaw...

TIMBER ARBOUR MADE FROM PART PALLETS PART CLS TIMBER.TREATED WITH BOILED LINSEED OIL. PALLET TIMBER WAS USED FOR SIDES AND ROOF,ALSO DIAMONDS ON FRONT AND BACK.PALLET STRIPS ARE  3 INCHES...

This morning I’m putting the finishing touches on our new DVD, “Finishes that Pop with Glen D. Huey.” In the Popular Woodworking shop, Glen talks about finishing in passing ,...

by George Sturt Author Jim Tolpin rates “The Wheelwright’s Shop”as his No. 1 favorite book , and thinks it should be required reading for all woodworkers. After reading it, I...

  I’m using my shopmade horizontal router table to mill the stub tenons on the rails. I choose to use this tool to mill the rails flat on the table...

  Now that the cupboard casings are completed, the next step is making the doors. I have milled all the stiles and rails at the tablesaw.     I found...

BARK TREE MIRROR FOR ANY OCCASION

IN MY SPARE TIME I ALSO CONVERT BRITISH RED PHONE BOXES  AND THEY ARE MADE TO ORDER ONLY .I BUY A RED PHONE BOX THEN I STRIP IT DOWN. REPAINT...

NAIL GUN USED IN PINNING FURNITURE 1/2 INCH PINS AND 1 1/4 PINS PLUS 3/4 PINS WHICH I HAVE TO ORDER MORE.USING GUN TO PIN TIMBER THE PINS FIRED GO...

AS I CANNOT ENTER THE CONTEST THEY ARE ADVERTISING.DUE TO NOT BEING A USA CITIZEN. I THOUGHT I WOULD SHOW YOU WHAT I DID TO AN OLD TABLE WITH CABRIOLE LEGS.THIS...

I was curious, but not much, when my son started telling me about his visit to an old brush-making business here in Cincinnati that was closing its doors after 100...

Adam Cherubini became a contributing author to Popular Woodworking in mid-2005. Since then, he’s graced our magazine with the “Arts & Mysteries” column , introducing many of [...]