Archives

Tablesaw Worktable Turn your tablesaw into extra workbench space with a piece of 3⁄4-in.plywood.Attach wood strips around the plywood edges for a snug,no-slide fit on the metal table. [...]

Q & A: Board Feet Calculation   Q: I used to buy planed and jointed lumber (S4S) at a home center where it was sold by the lineal foot.Now that...

Q & A: Rusty Router Collets Q: Returning to my shop after working outside this summer, I noticed a rusty film on my router collets and bits.What’s the best way...

Mobile Router Center This rolling router center has onboard storage for all your router components, folds into a tidy package, serves as an extra work surface and rolls out of...

At-Hand Tool Storage By Bob Ungar I hate fumbling around in drawers or digging into cabinets for tools.That’s why I love perf-board. It displays my hand tools out in the open where...

Q & A: Truing a Framing Square   Q: I just inherited my grandpa’s framing square. It’s big and heavy and I’d like to use it but it isn’t square!...

Q & A: Rub-Joint Gluing   Q: My panel glue ups drive me nuts because the boards slide around whenever I clamp them together. Then I end up beating them...

Q & A: Final Rubout   Q: I always have problems getting a smooth finish. I sand the wood with 220 paper,wipe it with a tack cloth, apply three coats...

Is Your Shop Too Small? Tips for making king-size projects in a pint-size shop. By George Vondriska n a recent poll of woodworkers, the most common complaint,by far, was that...

Q & A: Jointing Thick Wood with a Router Q: I have a very small shop and don’t have the space for large machines like jointers and planers. I need...

Q & A: Pencil Mark Cleanup Q: How do I get the pencil marks off my oak plywood bookcase? I tried using an eraser, but that didn’t get down into...

Q & A: Cupped Door Panels Q: Recently I glued up some 1⁄4-in. panels for cabinet doors.My other life kept me out of the shop for a week and when...