Atoma Diamond Plates

Tool: Diamond Sharpening Plates Manufacturer: Atoma Price: $63 Diamond sharpening stones have enjoyed a steady increase in popularity because they cut fast, never need flattening and last a long [...]

Sliding Bandsaw Fixture

A large bridle joint requires an open-ended mortise that may be too deep to cut with a 10″ tablesaw. I encountered this problem when I used my saw to make bridle joints on an exterior door. [...]

Hobbyists Cabinet Saw

Tool: Powermatic PM1000 Manufacturer: Powermatic Price: $2400 (50″ fence) The list of 110 volt cabinet saws continues to grow. That’s great news, as it puts a great many of the [...]

My Boring Story

My Boring Story I needed to rout a deep stopped groove in a long 2×12. So, I installed an up-cut spiral bit in my plunge router, jointed a board to use as a straightedge and clamped [...]

Extra-Wide Blades

Tool: Thick Kerf Flat-Top Saw Blade Manufacturer: Infinity Price: $130 Saw blades come in two basic varieties: thin kerf and standard kerf. For wider cuts, you use a dado set, right? Well, now [...]

Scary-Sharp Adhesive

“Scary sharp”—sharpening on sandpaper adhered to glass—works really well, but one thing has always bothered me. I’ve tried spray adhesives as well as PSA (pressure sensitive [...]

Precision Doweling Jig

Tool: 08350 Dowelling Jig Master Kit Manufacturer: JessEm Price: $195 Dowel joints are a strong, simple and low-cost method of building furniture. All you need is a jig and a drill. Decent jigs [...]

No-Fuss Locking Clamps

Tool: AutoMaxx clamps Manufacturer: Kreg Price: $24-$29 Are you a pocket-screw fan? If so, you know that locking clamps are extremely handy for holding parts together during assembly. In fact, [...]

Workshop Tips: Simple Storage

Simple Storage by Bill Wells Storage space in a small shop is hard to come by. My tool collection keeps growing, but my shop stays the same size! I needed to organize, so I bought a couple milk [...]

Kamikaze Tailstock

Kamikaze Tailstock I often wax finished projects as they spin on my lathe, so it’s natural to wax the lathe’s bed at the same time. Waxing the bed prevents rust and makes the [...]

4 Shops, 7 Decades and Still Going Strong

by William Mikus My woodworking career began at age 7, in 1935, cutting out lawn ornaments from grocery store boxes and crates with an old coping saw. Paint was the only expense. My inspirations [...]

Briefcase Work Table

Tool: Keter Folding Work Table Manufacturer: Keter Price: $89 Here’s a really fresh take on an old idea. The Keter Folding Work Table is a real boon for guys with limited work space. At [...]