One of most fun aspects of furniture is not necessarily found in the shop. Yes, making wood dust and building furniture is a blast – that’s why we do it. But discovering something that is not easily explained is fun, too.
The week immediately after labor day – that would be beginning Tuesday September 3rd – I have a class scheduled at the Connecticut Valley School of Woodworking (CVSW). During that week long class, the project is an early, transitional lowboy that straddles both the William & Mary and Queen Anne periods. (It’s the piece shown above.)
I’ve written a few posts about this lowboy on my personal site, woodworkersedge.com, if you’re looking for more information. One recent post discusses how easy it is to build this piece. There are a couple of openings for the class if you want to join us. Contact Bob Van Dyke at CVSW to register.
So here is the not-easy-to-explain discovery. The dovetailed drawers on this early piece of Queen Anne furniture have tapered sides, as seen in the right-hand photo. Tapered sides in drawers are not new to me, or to you for that matter if you’re a regular reader of Popular Woodworking Magazine.
In the June 2012 issue (#197), we published an article on how to build a Shaker Counter that was originally built by Grove Wright. It is on Shaker furniture that I have seen this drawer characteristic. Each time I’ve seen this interesting and more-challenging-to-complete technique, it has been on a piece of furniture built by or in association with Grove Wright. Here it is now on a piece that is not associated with Wright, and not even a Shaker design – the lowboy is far too decorative to be found anywhere near (relatively speaking) a Shaker community.
Grove Wright, according to the book “Shaker Design,” by June Spriggs, was born in 1789 in Pittsfield, Mass. and was raised in the Tyringham Shaker community. I don’t have a date on the lowboy, but I do know it’s a Connecticut piece and the design would date the piece to around the first quarter of the 18th century, some 60 years before Wright’s birth.
Did Wright see this drawer technique as he traveled the Northeast? Did a family member outside the Shaker community own the lowboy at one time? Is it possible that the craftsman of the lowboy joined the Shakers and taught tapered sides to young Master Wright? Or was this technique an accepted method that, for some unexplained reason, we don’t see often? These are the mysteries of reproduction furniture.
If you’re interested in building this lowboy, sign up at CVSW and join us for the week – nothing is better than having to spend a week doing nothing but woodworking. Another option is to take off and build this piece on your own, working up the drawings and working out the details. Or, you can sit patiently for a few months until we publish the article in Popular Woodworking Magazine. In that article, I’ll have step x step instructions and complete drawings. I may even have the answer as to why tapered drawer sides show up on the lowboy and in the work of one of the most recognized Shaker craftsman.
Don’t hold your breath on that last one.
You can get more information on Shaker furniture in “The Complete Shaker Collection” by the Editors of Popular Woodworking, or in the complete updated and improved classic by Thomas Moser, “How to Build Shaker Furniture.”
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.