Candle Holders

Here are a couple of candle holders that were made from some old oak boards that were almost used for firewood. …

French Country Table by Tim Raml

FRENCH COUNTRY TABLE30”T x 41"W x 62” – 84”LWalnut, boiled linseed oil, wipe-on poly. Tim RamlBaltic, SD “This table was the first time I used rough lumber for [...]

Display Cabinet by Ron Spears

DISPLAY CABINETRon Spears60”T x 24”W x 12”DWalnut, ash, boiled lindseed oil. “All the solid wood comes form a local mill. I cut the wood into strips with beveled edges [...]

Rocking Horse by Bill Brun

ROCKING HORSE Bill BrunLongwood, Fl  Materials: Red oak; wool yarn for the mane and tail; soft leather for the ears.Finish: Miniwax Red Oak oil based stain; four coats of Minwax [...]

Ted’s Altar 2

Drawings can only get you so far when you're designing a piece. Sometimes, when I'm stuck, I leave the drawing board and make full-size parts. Here's a sample joint I made before [...]

Wood Pie Safe by Ed Koenig

WOOD PIE SAFEEd KoenigCherry, walnut, osage orange, purpleheart, Brazilian satinwood, bloodwood, mahogany, lacewood, sassafras, basswood, zebrawood, boiled linseed oil, turpentine and beeswax. [...]

My Norwegian Tine

      I just finished the "Nordic-Style Bentwood Box' that was featured in your Dec-Feb 2009 magazine. I am 64 years old, and It was the best project I have ever [...]

Dogwood Hutch by Powell

DOGWOOD HUTCH*** PowellCorvallis, OR  Pacific dogwood (Cornus nutallii); locally harvested and air dried, beveled glass, shellac and wipe-on poly.  “The dogwood boards were [...]

Music Bench by Curtiss C. Bohall

MUSIC BENCHCurtiss C. Bohall11 7/8" T x 15"D x 22"LCherry, brass“My wife needed a bench for her new keyboard.  It had to have wheels with a top that was easily removed. [...]