Archives

FORGET RUBIKS CUBE ?HOW ABOUT RUBIKS IN A CUBE.?WHICH IS THE MORE IMPOSSIBLE ?

THE ALL AMERICAN BASEBALL IN A SOLID CUBE.I THINK THIS WOULD MAKE A NICE TALKING PIECE FOR ANY BASEBALL CLUB IN YOUR COUNTRY.

MADE FROM OFF CUTS OF 6 X 1X 3/4 GRAVEL BOARD. AND 3X2 TANALISED TIMBER OFF CUTS. THESES WERE 3 AND 4 FT LENGHTS. SOME DAMAGED. BUT All WAS NEEDED...

  Oops! Tongues Refuse to Fit Grooves   I made this cool looking door panel by making cove cuts on my tablesaw. Cool looking, yes, but  the tongue profiles swelled...

  Oops! Router Bit Gouges Template   Here's an easy fix if you accidentally gouge your template with a router bit: Repair the damage with auto body filler. Generously apply...

 Oops! Biscuit Slots Refuse to Align I was cutting slots for a long edge joint the other day, and everything was humming right along. But when I put the boards...

Light Woods Red Woods Brown Woods Dark Woods AilanthusAnigreAshAsh, QuiltedAspenAvoidireBirchBirch (Masur)ButternutElmElm, ChineseElm, GreyHollyKelalaKentucky CoffeetreeMapleMaple, BirdseyeMaple, [...]

TANALISED 9X3 PLANK.JOINTS HOUSED AND GLUED.OILED 5 TIMES FOR ALL WEATHER PROOF.THIS IS 49 INCHES LONG X 24 INCHES HIGH .ROUGHLY PLANED AND SANDED TO MAKE IT LOOK RUSTIC AND...

With just three pieces of scrap wood.    The oak cleat rides on this Dewalt Jobsite Tablesaw's fence rail.    The plywood triangle has a factory edge and a [...]

Yep, it supplied the wood for asmall cabinet.     The flat panels are just 1/4' luann plywood, from a different "crate", but the solid wood parts came from a [...]

IF YOU HAVE A OLD SAW?DONT THROW IT AWAY,CUT OUT A 6X4 SECTION WITH ANGLE GRINDER?THEN PUT AN EDGE ON ONE SIDE.AND YOU HAVE A CABINET SCRAPER.OLD HARDPOINT SAWS HAVE...

After masking-taping some protective paper on the hood's exterior I took it to the sand blasting booth/chamber. I sand blasted the hood's interior, then I cleaned it form sand particles...