Archives

All the rails being cut, now let’s fine tune them.     I fine tune each tenon with this small shopmade tool that I call Poor Man Shoulder Plane. To...

PALLET WOOD RADIATOR COVER.MACHINED, SANDED, CUT TO SIZE .,SPINDLE MOULDED EDGES,ASSEMBLED. GRILL, RIPPED DOWN 3/8  square  PALLET WOOD AND GLUED AND PINNED TO MAKE GRILL..AS AGAIN [...]

AS I MAKE USE OF EVERYTHING? WILL BE MAKING USE OF A FYLMO MOWER MOTOR AND CASING TO MAKE A SANDING DISC. AS I HAVE OVER 29  X 12 INCH ...

AS THEY SAY SEEK AND YOU SHALL FIND. SAW THESES AND MADE A OFFER OF £20 – $33 IN US DOLLARS? THE COMPANY HAD THESE OUTSIDE FOR NEARLY 7 MONTHS HAD MY...

After making the groove on the first rail I think about adding a featherboard to keep workpieces against the rip fence to obtain consistency on the grooves and the shoulders....

  This is a first sanding session of the rails and the stiles. At this step I can make it easier by clamping them. As shown, I align them with...

14 Great Little Tools Time-tested and woodworker-approved, here are some of our favorite workaday tools By George Vondriska “What tools do I need for my shop?” This has to be...

I came up with this very unique and satisfying version of a clamp worktable, made right here in my shop, using material from my sheet goods scrap pile. I designed...

I'm a new member to the website. My wife's step-grandfather has gotten me hooked on woodworking; gifted me a subscription 2 years ago & I recently purchased my own  2...

#147 April/May 2010 Future Woodworkers of America:www.AmericanWoodworker.com/147/Lvshops Trestle Table Planswww.AmericanWoodworker.com/147/LargeTrestleTable Bent Lamination [...]

  Finally, the construction of the hutch’s glass doors. To cut long boards on a tablesaw, the panel cutter is the safest. And if it’s well made, the cut wil...

LEFT OVER FROM CLIMBING FRAME. PALLET PLANTERS ADDED ANTIQUE STAIN TO THE LINSEED OIL BEFORE SPRAYING. TO BUY THESE FROM A GARDEN CENTRE WILL COST £29.99 TO £39.99 EACH. THIS...