We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
These last few weeks I’ve been deep in another spate of chairmaking. If you’ve ever built a Windsor chair, you know that they are a great antidote to making cabinets. All the hand skills are basically the same, but the head skills…¦. Whew. The angles and “best guesses” stretch my gray matter like a good bourbon.
Today I’m gluing up the arm bow to the second of a set of four chairs that are based loosely on Welsh Stick chairs. (By the way, the best book about Welsh stick chairs is “Welsh Stick Chairs” by John Brown. It’s sometimes a bit hard to find, but worth it.) In any case, as I was putting together the arm bow I reached instinctively for my pinch dogs. Knock these into a joint and they will pull it together. They’re great for unusual clamping jobs where you might spend a couple hours building a clamping caul for a one-time use.
Once the glue is dry, a knock with a hammer on the end releases the dogs’ bite. They are Egyptian technology (wedges) at its finest and highest.
The only downside are the holes they leave. Usually, you can work around the holes. These particular holes will be on the underside of the arm bow , only the bugs and cats will ever comment on them. If you use the pinch dogs when clamping up a tabletop (they really help keep the ends aligned), you can crosscut the holes off when you trim the top to size.
As I was knocking these in, Senior Editor Bob Lang mentioned that a good topic for a future article would be “The Best $25 I Ever Spent in Woodworking” and that we should survey readers and pros and make a list.
If you’ve got a vote, drop me a line. I’d really like to hear it.
