My recent article on the new polissoirs from Don’s Barn and a long-term test of the burnishing effect from the tool had a significant error: The photo showed the wrong sample board.
That similar-looking sample board was given to me by woodworker Steve Schafer – he’ll be blogging about the finishing schedule on that sample board in the near future.
Last night I rooted through my wood rack to find the mahogany sample that I prepared 18 months ago. I made it halfway through the rack without finding it; when it turns up, I’ll post a photo of it.
In the meantime, here are photos of two projects that I finished with a polissoir about the same time I made the sample board. These two stools were finished with a polissoir only on the lathe. Like all properly prepared polissoirs, it had a little wax on the tip, which was applied when I first got the tool. But I wouldn’t call this a wax finish. It’s a burnished finish, much like the burnishing finish you get when you use shavings to polish a piece spinning on the lathe.
So the result isn’t wrong – just the photo.
Apologies for the error. I should have marked Steve’s sample board as it is very similar looking to mine.
— Christopher Schwarz
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.