In Shop Blog

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.


I have burned through a lot of burnishers, from the ones I’ve made myself out of carbide rod to very expensive variants. My favorite is the French-made Arno burnisher.

Everything about the tool is right. The handle is lightweight aluminum, perfectly shaped and has a guard so my fingers won’t slip off the handle and onto the scraper. The tool has two carbide rods for burnishing scrapers. One has a round profile, which is what I typically use to turn a burr on scrapers. The other one has a triangular profile, which allows me to add some serious pressure to a scraper that is particularly hard (and I see more hard scrapers these days).

Both bits of carbide are very fine grained and smooth. With a drop of oil, the carbide glides over the steel as it turns a burr.

Oh, and it comes with a leather sheath, which really does protect the tool from abuse in your drawer or tool chest.

— Christopher Schwarz

Read Day 1 of the gift guide here: Clauss Scissors.
Day two on a Boot Tray for Sharpening.
Day three on humidity monitors.
Day four on a MWTCA membership is here.
If you’d like to read gift guides from past years, check this link.

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search