Projects

Lasers have proven to be a wonderful way to add safety and accuracy to miter saws. Now Hitachi has taken ease-of-use to a new level by adding both a laser and a digital readout to its C12LCH [...]

I use a flush-trim bit a lot, particularly for trimming face frames to cabinet sides and parts flush with templates. Unfortunately, after a few sharpenings, it's not a flush-trim bit any [...]

      Do you turn on your dust collector every time you should? “I'm only making one cut,” you say. But how many times in a day do you make “only one [...]

When my shop was a two-car garage with one outlet, I had to carefully choose what I plugged in. That generally meant no radio, because there weren't any outlets left for it. Enter Bosch's [...]

Drop-Down Bit Storage In my crowded shop, there's no such thing as unusable space. My router bits store under a shop cabinet, out of the way until I need them, thanks to a scrap of wood, a [...]

Changing bandsaw blades used to be a pain, because my bandsaw doesn't have a quick-release blade-tensioning mechanism. I finally got tired of ­ hand-cranking, so I replaced the tensioning [...]

While sweeping up offcuts from around my bandsaw, I realized two things: First, I hate sweeping. Second, a dustpan-shaped tray attached to the bandsaw would catch most of the offcuts I was [...]

Align Bandsaw Wheels By Dave Munkittrick & Bruce Kieffer Q. I’ve tried everything to get good resaw results on my bandsaw, but the blade still wanders. What gives? A. If you use a sharp [...]

4-Way File Cabinet Arrange your files any way you want! By Andy Rae Imagine the ultimate home office: an executive desk, a comfy swivel chair, your computer and phone within easy reach, pens and [...]

Pipe Clamp Pad-Stands They don't come any simpler than this! Take squares of plywood, 6" on a side, and drill holes in them to make great clamp pads.They raise the clamps up off the [...]

You're about to be marooned on a desert island. You're allowed one power tool to take with you. Which would it be? My choice would be a bandsaw. After the router, a bandsaw is the most [...]

They're really easy to install. You simply drill holes and pop the hinges and mounting plates into place. Cabinet shops use sophisticated boring machines for production work, but all you [...]