Projects

  I really don't need five cordless drills, seven routers or 24 antique hand planes, but I can't help it. I'm a tool nut. Are you? Have you ever bought...

After years of fumbling with clamps, I decided there must be a better way to attach featherboards to my tablesaw's rip fence. Two T-tracks screwed to the fence allow me...

Tips for Building Cabinets with Pocket-Hole Joinery New tools and improved techniques make pocket-screw assembly faster than ever. By Brad Holden Many production shops use pocket-hole joinery to [...]

Turned Lidded Box A Precision Fit Lid that Snaps Shut By Alan Lacer Of all the different forms of woodturning, I find the most delight in creating lidded boxes. The...

"What? A $600 machine that just sharpens hand tools?" That's the reaction I've heard when introducing my pals to the latest in sandpaper-sharpening technology, the Lap-Sharp [...]

My shop space is so limited-only 12 feet square-that I designed this system to house four machines: belt-disc sander, miter saw station, drill press and planer. Each machine has an...

With this simple jig, a drill press and a cup grinder, I can sharpen any jointer or planer knife. First I make a hardwood block and cut it to 1/16...

For fast and accurate dadoes, this jig is hard to beat. The trick is to run the router against one guide, then back against the other. This allows you to...

The face vise on my workbench didn't hold long boards rigidly enough until I added this adjustable "bench slave." And it only cost about $30. First I milled a board...

            I came across some wonderful oak boards for a small table I wanted to build. The problem was the boards were too wide for...

    After years of wishing my old workbench had a tail vise, I realized I could make one of my new Jorgensen Cabinet Master bar clamps do the job....

The next time you use your saber saw, forget about hauling out the sawhorses or cantilevering a hard-to-hold workpiece off your bench. Extruded polystyrene insulation board, the rigid pink sheets...