Shop Blog

I love to look at websites of woodworkers – amateurs and professionals – and see photos of their work. But when they describe their work using the following words, I...

Thanks for all the great comments! Congratulations to “Thomas426” the winner of this book giveaway. Stay tuned for more exciting book giveaways and if you’re interested in a [...]

I recently completed a seven-drawer dresser. The drawers featured hand-cut dovetails and are of graduated heights from top to bottom. Cleaning up the drawers with my handplanes was initially tough...

For an upcoming “Tool Test” in the February 2018 (#237) issue of the magazine, I reviewed the Lixie Dead Blow Mallet (the 30 ounce version, with 1 1/2″ diameter heads)....

As the Chinese curse goes, “may you live in interesting times.” Sometimes, “interesting times” is actually a good thing. In the case of CNCs, there are a lot of new...

I’m a “behind-the-scenes” junkie – any chance I get to see the inner workings of manufacturing or industrial spaces, I jump at the opportunity. So, I was especially thrilled to...

The beloved backyard tree No store-bought lumber’s story can compete with that of boards from your own backyard. It can be wrenching to fell a beloved tree, but transforming it...

Thanks for all the great comments! Congratulations to “Geneaux” the winner of this book giveaway. Stay tuned for more exciting book giveaways and if you’re interested in reserving a copy...

Curvy furniture is great to look at and usually offers a tactile aesthetic that makes it appealing. Holding it all together is the joinery – and whether it’s dovetails, tenons or lap...

I typically keep a few pieces of my work in the window at my workshop in Covington, Ky. Right now I have a couple chairs on display, plus an aumbry....

When connecting a Live edge waterfall joint together we need to expect a “tectonic” shift of the connected corner. While mitering the two banks of the joint at 45 degrees...

In earlier posts in this series, I explained how you can take simple computer drawings and make paper patterns. In my last post, I revealed the process I used for years...