Featured Article

By Christopher Schwarz Page: 29 From the August 2009 issue #177 Buy this issue now Yes, you can mark out your joints with a pocket knife, a craft knife or...

Delta re-invents its flagship table saw with great success. Bravo. By Glen D. Huey Page: 28 From the August 2009 issue #177 Buy this issue now There’s been so much...

Never bring an apron plane to do a jack plane’s job. — Megan Fitzpatrick

A great router table for little cost and just a few hours to build. By Robert W. Lang Pages: 74-75 From the June 2009 issue #176 Buy this issue now...

How do new imported smoothing planes compare to a Lie-Nielsen or Clifton? By Christopher Schwarz Pages: 56-58 From the June 2009 issue #176 Buy this issue now Thanks to the...

By Christopher Schwarz Page: 29 From the June 2009 issue #176 Buy this issue now My first great set of chisels was made by Ashley Iles, a small manufacturer with...

By Glen D. Huey Page: 29 From the June 2009 issue #176 Buy this issue now Routers perform a lot of work in the shop, but handheld routers are only...

This do-it-all band saw has all the power and finesse you’ll need. By Glen D. Huey Page: 28 From the June 2009 issue #176 Buy this issue now Grizzly calls...

By Glen D. Huey Page: 31 From the April 2009 issue #175 Buy this issue now Ridgid now has its version of a granite-top table saw on the market. With...

By Glen D. Huey Page: 31 From the April 2009 issue #175 Buy this issue now Many woodworkers rely on random-orbit sanders as their primary method to level an out-of-whack...

New saw design opens the door to hand sawing. By Robert W. Lang Page: 30 From the April 2009 issue #175 Buy this issue now One of the thrills of...

By Glen D. Huey Page: 40 From the February 2009 issue #174 Buy this issue now Drills have been the focus of many tool manufacturers for a few years now....