Archives

By David Thiel & Christopher Schwarz Pages: 86-91 Once a year the woodworking tool manufacturers roll out their newest and brightest offerings for the press and the public. This year’s [...]

By David Thiel Pages: 49-56 From the November 2005 issue #151 Buy this issue now In this chapter of our series on case construction we focus on the materials that make up the boxes-within-boxes [...]

Designed for piercing wood and laying out marks, some awls are better than others. Learn which ones are best suited to your style of work. By Paul Sellers Pages: 44-48 From the November 2005 [...]

You can buy this machine with a variety of features, but what’s critical is that Jet got the basics just right. By Christopher Schwarz Page: 38 From the November 2005 issue #151 Buy this issue [...]

By David Thiel Page: 36 From the November 2005 issue #151 Buy this issue now Random-orbit sanders have made my woodworking career a much happier thing. And each year there are improvements to the [...]

By Christopher Schwarz Page: 36 From the November 2005 issue #151 Buy this issue now Hand-cut dovetails can be tricky at first, so anything you can do to eliminate marking errors will improve [...]

By David Thiel Page: 35 From the November 2005 issue #151 Buy this issue now Woodworkers need a good set of Forstner bits. Designed to cut clean, flat-bottomed holes, they’re very handy to have [...]

By David Thiel Page: 35 From the November 2005 issue #151 Buy this issue now While using screws on a woodworking project may not be fine woodworking, it happens all the time. To improve the look [...]

By Steve Shanesy Page: 34 From the November 2005 issue #151 Buy this issue now Even in a small shop, traipsing back and forth to the dust collector to turn it on and off can be a nuisance. [...]

By Christopher Schwarz Page 34 From the November 2005 issue #151 Buy this issue now Most modern mortising chisels these days are poorly ground, misshapen and uncomfortable to use. It’s no small [...]

Contradictory finishing information is frustrating. Here we clear up one example. By Bob Flexner Pages: 110-111 From the October 2005 issue #150 Buy this issue now Each month Popular Woodworking [...]

What we like (and dislike) about this revolutionary machine. By the Popular Woodworking staff Pages: 86-87 From the October 2005 issue #150 Buy this issue now A safe table saw – that’s the holy [...]