Archives

You may have come across the term “water-white” for describing finishes. It’s a little confusing. It means a finish that is totally devoid of amber coloring in liquid form. The...

Last summer, upon accepting the position of managing editor here at Popular Woodworking Magazine, I wrote a blog post publicly asking myself if I was a woodworker. Today, as I...

Flush-cutting saws offer an amazing promise: They can cut a dowel or tenon flush to its surrounding surface without causing any damage. The truth is, however, no matter how awesome...

Along with 64,000 or so (at least as of today) other people, I follow Goebel & Co. Furniture on Instagram. The furniture pieces coming out of this St. Louis-based shop...

It is very easy to install thin plywood splines in mitered corners of boxes and frames But, to do so successfully, you will have to design the placement pattern of...

When I was about 11, my parents took a trip to Cancun and left us with Hazel, a Nurse Ratched type with a beehive hairdo, a messed-up back and a...

When it comes to turned furniture components, you only have a few options. You can buy mass-produced factory-turned components that do not accurately recreate the fine details in period [...]

A finish made from linseed oil and beeswax is an easy-to-apply, tactile finish that I like for turnings, vernacular chairs and other objects that don’t require the protection of a...

Here’s a finishing trick you may not be familiar with. You can brush or spray both sides of flat panels and cabinet doors without having to wait for one side...

If you’re at the point to where you’re at least thinking about the idea of adding a CNC to your shop, then you’ve likely done some research. If that’s the...

The April issue of Popular Woodworking Magazine (#231) just mailed to print subscribers and emailed to digital subscribers. It’s live in our online store too. There’s a lot to dig...

Frank Klausz reveals the family secret – how to make the watertight wood-on-wood joint for the bottom of his sharpening pond – a boatbuilder’s joint taught to him by his...