Archives

Our Tricks of the Trade column is written by our readers, and most of the entries come from “regular guys.” Occasionally we receive a trick from someone more recognizable, and...

View the full instructions for this project here. My favorite project is usually the last one I’ve finished, or the one I’m about to start. The cover project for the...

Today we’re taking the cover photo for the June 2011 issue, stacking bookcases based on the reproductions at Monticello. Last night, these bookcases were loaded up with about half of...

We have to hand it to Bosch. The axial-glide system found on the Bosch GCM12SD is the most innovative design idea to hit miter saws – ever. Hinged arms replace slide tubes. You can see the [...]

After writing about Deb Chalsty’s amazing workbench (here and here), and noting that the hardware looked like the bench on piano-maker H.O. Studley’s workbench, I got an e-mail from Patrick...

By David Thiel Page: 26 From the June 2004 issue #141 Buy this issue now Featherboards keep your work tight against fences and machine tables to reduce kickbacks and keep...

By David Thiel Page: 26 From the June 2004 issue #141 Buy this issue now In our November 2003 review of orbital jigsaws, the Bosch unit we tested was about...

By Christopher Schwarz Page: 24 From the June 2004 issue #141 Buy this issue now I’ve been sharpening tools for a long time, so it’s rare for me to start...

By David Thiel Page: 24 From the June 2004 issue #141 Buy this issue now Most woodworkers have drooled over a drum sander at one point in their life. Whether...

By Steve Shanesy Page: 8 From the June 2004 issue #141 Buy this issue now In the early decades of the 20th century, home woodworking got its start when woodworking...

I wanted my profit margin high but my ego was knocked low. By Angelo Paino Page: 104 From the April 2004 issue #140 Buy this issue now Like most woodworkers...

Three pieces of wood make crosscutting and planing easier – no matter where you work. By Don McConnell Pages: 98-100 From the April 2004 issue #140 Buy this issue now...