Archives

Leaving the underside of your tabletop bare doesn’t cause warping. By Bob Flexner Pages: 110-111 From the October 2004 issue #143 Buy this issue now Logic is usually a good...

You can’t buy them, but you already have at least two. By Jim Tolpin Pages: 102-103 From the October 2004 issue #143 Buy this issue now When I started woodworking...

Learn to create this classic furniture detail using a template, a band saw and a little lathe work. From the October 2004 issue #143 Buy this issue now I like...

You don’t have to sacrifice quality to set up an affordable (and complete) workshop. These tools do good work on a budget. By David Thiel Pages: 66-71 From the October...

A modified cross-sliding table turns your drill press or benchtop mortiser into a precision boring machine. By David Thiel Pages: 61-65 From the October 2004 issue #143 Buy this issue...

By Nick Engler Pages: 53-60 From the October 2004 issue #143 Buy this issue now Few tools have revolutionized a craft as much as table saws have changed woodworking. These...

By David Thiel Page: 32 From the October 2004 issue #143 Buy this issue now Every woodworker needs a workbench. Building one can be a very involved project that highlights...

By David Thiel Page: 32 From the October 2004 issue #143 Buy this issue now Hybrid is in. Manufacturers are working hard to offer the features of a cabinet saw...

By David Thiel Page: 31 From the October 2004 issue #143 Buy this issue now Because woodworkers come in a variety of heights, one bench height doesn’t satisfy all. And...

By Christopher Schwarz Page: 31 From the October 2004 issue #143 Buy this issue now After months of testing the new Dadonator stack dado set from Infinity Cutting Tools I’m...

By Christopher Schwarz Page: 30 From the October 2004 issue #143 Buy this issue now Some Japanese saws fail to live up to expectations in the hands of Western woodworkers...

By David Thiel Page: 30 From the October 2004 issue #143 Buy this issue now Powermatic’s 14″ band saw has all the bells and whistles, but you’re going to have...