I find myself needing a lot of small circles for use on wooden toys. When I cut those disks out with a circle-cutting jig on the band saw, the edge is a little too rough, so I’ve made a fixture for the disk sander that makes quick work of sanding the wheels perfectly round and smooth. A ledger strip on the bottom plate of the fixture fits into the sander’s miter slot to hold it in place. Atop that is a moveable arm, secured in place loosely enough so that it can freely pivot. At the working end, I cut off an 1⁄8″ drill bit that fits through the holes in the center of the rough disks; it’s epoxied in place to the swing arm. In front of the arm is a stop that controls the diameter to which the disks are sanded (it’s simply screwed in place, and can be easily moved as needed). I slip a rough disk onto the cut-off drill bit, then swing the arm into the rotating sander until the disk contacts it. The motion of the sander rotates the disk at high speed and sands it round in seconds, while the stop keeps it from getting too small. Dan Martin, Galena, Ohio
Cash and prizes for your tricks and tips!
Each issue we publish woodworking tips from our readers. Next issue’s winner receives a $250 gift certificate from Lee Valley Tools, good for any item in the catalog or on the website (leevalley.com). (The tools pictured below are for illustration only and are not part of the prize.)
Runners-up each receive a check for $50 to $100. When submitting a trick, include your mailing address and phone number. All accepted entries become the property of Popular Woodworking Magazine. Send your trick by email to firstname.lastname@example.org, or mail it to
Tricks of the Trade,
Popular Woodworking Magazine,
8469 Blue Ash Road, Suite 100,
Cincinnati, OH 45236.